ISO 9001:2015 Certified
Live Customer Support
4.5/5 on Trustpilot
100% Quality Guarantee

Anti-N-methylmesoporphyrin IX (NMM) + mesoporphyrin IX (MPIX) + metalloderivatives Aptamer [ST1] (Biotin) (A320947)

Shipping Information

$40
Dispatched from St. Louis, MO.
Lead Time: 20-35 business days.
Name
Anti-N-methylmesoporphyrin IX (NMM) + mesoporphyrin IX (MPIX) + metalloderivatives Aptamer [ST1] (Biotin)
Description
Synthetic DNA aptamer to N-methylmesoporphyrin IX (NMM) + mesoporphyrin IX (MPIX) + metalloderivatives [ST1] (Biotin).
Specificity
kD listed is for NMM. Aptamer also binds to MPIX (Kd = 3.6 µM), Fe(III)-MPIX (2.6 µM), hemin (1.7 µM), Ni(II)-MPIX (3.6 µM), and Zn(II)-MPIX (4.9 µM).
Aptamer ID
ST1
Conjugate

Biotin

Aptamer Resuspension
Resuspend to 100µM with 10mM Tris-HCl, pH 7.5, and 0.1mM EDTA.
Apatamer Refolding Conditions
Denatured at 90°C and then cooled (slowly) to room temperature for over an hour.
Apatmer Binding Conditions
Screening Buffer: 100mM Tris Acetate Buffer, pH 7.4, 200mM Sodium Acetate, 25mM Potassium Acetate, 10mM Magnesium Acetate, 0.5% Triton X-100, and 5% Dimethyl Sulfoxide. Binding Temperature: 25°C.
Sequence
5'-dApdApdCpdGpdTpdGpdGpdGpdApdGpdGpdGpdCpdGpdGpdTpdGpdGpdTpdGpdTpdTpdGpdApdAp-3'
Aptamer Length
25 nt
Aptamer Molecular Weight (Da)
7,883.18 Da
Aptamer Affinity
Affinity (Kd) = 0.7 µM
Extinction Coefficient
253400 M-1cm-1
Purification
HPLC
Product Form
Lyophilized
Concentration
Reconstitution dependent.
Formulation
Lyophilized from nuclease-free water (no residual salts).
Storage
Shipped at 4°C. Lyophilized: Store at -20°C. Reconstituted: Store short term at 4°C (i.e. use within days) or aliquot and store at -20°C (medium term: i.e. use within weeks) or -80°C long term. Avoid freeze/thaw cycles.
Product Notes
Anti-N-methylmesoporphyrin IX (NMM) + mesoporphyrin IX (MPIX) + metalloderivatives Aptamer [ST1] (Biotin) (A320947) is a replica of the aptamer described in PMID: 8639643.
General Notes
Aptamers have not been validated by Antibodies.com and they need to be tested/evaluated under identical conditions to which they were reported in the literature including, but not limited to, temperature and matrix/buffer conditions. All aptamers are manufactured on request and have a lead time of 20-35 business days.
Disclaimer
This product is for research use only. It is not intended for diagnostic or therapeutic use.
Publishing research using Anti-N-methylmesoporphyrin IX (NMM) + mesoporphyrin IX (MPIX) + metalloderivatives Aptamer [ST1] (Biotin) (A320947)? Please let us know so that we can list the citation on this page.